Quelltext der Seite CM-i.MX53

[[Image:CM-i.MX53 Top W300.png|right|200px]]

=== [[CM-i.MX53|CM-i.MX53]] ===



The Core Module CM-i.MX53 is based on NXP’s next generation, high-performance, power-efficient, consumer multimedia applications processor i.MX53. This processor features OpenGL® ES 2.0 and OpenVG™ 1.1 hardware accelerators, a multi-format HD1080p video decoder and a HD720p video encoder hardware engine, dual display capability, a SATA controller, IEEE1588 time-stamping and numerous serial interfaces (SDIO, SPI, I2C, UART). Further features are integrated security solutions, USB 2.0 controllers, Ethernet controller and simultaneous camera inputs. The Core Module is available for both, commercial and industrial temperature range. It addresses 1GByte DDR2-SDRAM, has an onboard NAND-flash of 2GByte and an additional SPI NOR-flash of 4MByte. 

The state of the art i.MX53 SoC in combination with the outstanding integration of several peripheral controllers, memory and voltage control, turn the CM-i.MX53 into a high-performance embedded platform for your future applications.


;Supporting development board
: [[I.MX#DEV-i.MX53|DEV-i.MX53]]

;Hardware
: [https://datasheets.becom-group.com/goto/cm-i.mx53/ Hardware Manuals]
: [[Revision Report CM-i.MX53|Revision Report]]

;Software
: [[Image:Logo-linux.jpg‎|35px]] [[Linux Software User Manual (i.MX53 Modules)|i.MX53 Linux Software User Manual]]
:: &rarr; [[Linux BSP customization for CM-i.MX53|Please read here]] for customizing the Linux BSP for your CM-i.MX53 module
:: &rarr; [[Linux BSP customization for DEV-i.MX53|Please read here]] if you are using a DEV-i.MX53 development board
:: &rarr; [[Linux BSP customization for Argos&reg;2D A100 Camera|Please read here]] if you are using an Argos&reg;2D A100 camera board
: [[Image:Mentor-logo.png‎|90px]] [[Inflexion UI Demo on i.MX53|Inflexion UI by Mentor Embedded]]
: [[Image:Qtlogo.png|25px]] [[Qt Embedded on i.MX53|Qt Embedded]]
: [[Image:Ubuntu.png|30px]] [[Ubuntu on i.MX53|Ubuntu]]

;Binaries
: [https://support.becom-group.com/releases/imx/mx53/ Binary Files]

;Tools
: Supported by [[Image:Arm-logo.jpg|50px]] [[ARM DS-5 Quick Start (i.MX53)|Development Studio 5 (DS-5)]]
: [[MfgTool (i.MX53)|MfgTool (Manufacturing tool by Freescale)]]
: [[Lauterbach ICD for i.MX53|Lauterbach Debugger]]
: [https://support.becom-group.com/releases/imx/mx53/config PEEDI Debugger]

[[Category:i.MX53]]