Quelltext der Seite Inflexion UI Demo on i.MX53

[[Image:Mentor-logo.png‎|right]]
This page contains instructions how to set up the Inflexion UI demo on Bluetechnix i.MX53 modules.

= Demo Video =
Want to watch our demonstration video first? Click [https://www.becom-group.com/rainbow2006/Portals/_rainbow/documents/Videos/inflexionui.mp4 here]!

= Software versions =
* Bluetechnix Linux BSP release 1.2
* Inflexion UI for i.MX processors version 2.3
** Get Inflexion UI via https://go.mentor.com/imxinflexion (You have to register)

= Instructions =

* Install the package on a Windows PC. The install folder (mgc/) also contains binaries for the target Linux OS and source code for the demo application. So you should copy the folder to your Linux PC where you compile the Linux BSP with LTIB usually. You will need it there later.
* Documentation is installed at
 <inflexion_install_path>/mgc/embedded_2011_03_iMX/docs/pdfdocs/
* The setup procedure for LTIB-generated root file systems is described in ''Chapter 3: Working with Inflexion UI on Linux'' in PDF file
 embedded_inflexion_ui_imx_user.pdf
* Download the i.MX53 hardware codecs package from the [https://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX535&nodeId=018rH3ZrDR988D&fpsp=1&tab=Design_Tools_Tab Freescale website].
 IMX_MMCODECS_11.05.tar.gz
* Unpack it and copy the package files to /opt/freescale/pkgs/ (on the PC where you compile the Linux BSP with LTIB):
 cp IMX_MMCODECS_11.05/Ltib\ Files/*.tar.gz /opt/freescale/pkgs/
* Unpack the .spec files and copy them to the LTIB installation directory:
 cd IMX_MMCODECS_11.05/Ltib\ Files/
 unzip ltib_spec_patch_base_on_11.05.01.zip
 cp ltib_spec_patch_base_on_11.05.01/* <ltib install folder>/ltib/dist/lfs-5.1/fsl-mm/
* We need to change LTIB configuration a bit. Go to your LTIB folder and run
 ./ltib -c
** In ''Package list'', select ''freetype'', ''libpng'', ''zlib'', and ''amd-gpu-bin-mx51''.
** In ''Package list-->Freescale Multimedia Plugins/Codecs'', select ''fsl-mm-codec-libs'' and ''gstreamer-fsl-plugins''
** Back to main configuration menu, select ''Configure the kernel'', then choose ''Exit'' and ''Save''.
* Kernel Configuration:
**Enable ''General Setup --> POSIX Message Queues''
**Disable ''Device Drivers --> Graphics Support --> Console display driver support --> Framebuffer Console support''
**''Exit'' and ''Save''
* Now, LTIB compiles added packages and creates the rootfs.
* After this is finished, copy
 <install_path>/mgc/embedded_2011_03_iMX/InflexionUI-Runtime-2.3/Linux/inflexionui/libs/armeabi/iMX5x/gles2/libinflexionui.so
to LTIB's ''rootfs/usr/lib/'' folder (This is the Inflexion UI library).
*Now, we must compile the Inflexion UI demo, so add the default compiler to your $PATH. From the LTIB folder, run
 source set-toolchain-path
*Build the demo application
 cd <inflexion_install_path>/mgc/embedded_2011_03_iMX/InflexionUI-Runtime-2.3/Linux/demo/inflexion_demo
 make LTIB_ROOTFS=<ltib_rootfs_path>
where <ltib_install_path> is the complete path to LTIB's ''rootfs'' folder.
*Copy ''bin/inflexionui_demo'' to rootfs/usr/bin in LTIB's ''rootfs'' folder.
* Set up a bootable SD card for the CM-i.MX53/Qseven-i.MX537 by running ''./setup_sdcard.sh''. It will contain the Inflexion UI demo. (Alternatively, you may boot via NFS.)

* Boot the CM-i.MX53 from the SD card. For the Qseven-i.MX537, wait until it has loaded U-Boot, hit any key to stop autoboot, and type
 run bootcmd_mmc
:to run Linux from the SD card.

* Log in and run
 inflexionui_demo

'''READY!'''

= Demo operation =

If you have connected a USB keyboard, navigate with the following keys:
* Up, down, right, left: Use the arrow keys
* Back: Use the Tab key

[[Category:i.MX53]]