Quelltext der Seite Argos 3D - P310 Software

== Bootloader ==
Take care when you perform a bootloader update! Loosing power during the update process may damage the flash content, makeing the device unusable! Make a bootloader update only if the new version contains features which are absolutely necessary for your application!

; V1.0.0: Initial release

; V1.1.0: Update
: Changes from previous version:
:{| class="wikitable"
|-
|'''Type''' || '''Description'''
|-
| Bugfix || Bugfixes to prevent unexpected behaviour
|-
| Modification || Trigger in GPIO now correctly configured as input
|-
| Modification || Trigger out GPIO now correctly configured as output
|-
| Modification || LIMs are now disabled in Bootloader state (not supported by LIMs <V2.0.0)
|}

; V1.2.0: Update
: Changes from previous version:
:{| class="wikitable"
|-
|'''Type''' || '''Description'''
|-
| Bugfix || Bootloader did not delete user reg map on update
|-
| Feature|| Added network configured bootloader mode support
|}

The bootloader binary files can be found on our customer software package CD downloadable here: [https://support.bluetechnix.com/software/ download section].

== Firmware ==

The firmware binary files can be found on our customer software package CD downloadable here: [https://support.bluetechnix.com/software/ download section].

;V1.0.0: Initial release

;V1.1.0: Update
: Changes from previous version:
:{| class="wikitable"
|-
|'''Type''' || '''Description'''
|-
| Feature || Added LIM control
|-
| Feature || Added temperature manager
|}

;V1.2.0: Update
: Changes from previous version:
:{| class="wikitable"
|-
|'''Type''' || '''Description'''
|-
| Feature || Improved temperature stability
|-
| Mod || Changed temperature compensation factor 'a' to 1E-5 resolution (TempCompGradient3Lim, TempCompGradient3Tim, TempCompGradient3Baseboard) 
|}

;V2.0.0: Update
: Changes from previous version:
:{| class="wikitable"
|-
|'''Type''' || '''Description'''
|-
| Bugfix || Fixed mirrored 3D image
|-
| Feature || TIM firmware version is read into CPLD firmware version register
|-
| Bugfix || Vertical and Horizontal FoV calculation corrected
|-
| Mod || Removed wait time to reduce jitter in manual trigger mode
|-
| Mod || Temperature compensation now active for all configurable modulation frequencies
|-
| Bugfix || Temperature compensation will not stay deactivated after configuring an unsupported modulation frequency anymore
|-
| Feature || Added support for network configured bootloader start and update (requires Bootloader V1.2.0 or higher)
|-
| Feature || Added manual trigger burst mode
|}

== Support Matrices ==

;Bootloader Hardware Support Matrix
:The following table shows the compatibility list between different hardware and bootloader versions.
:{| class="wikitable"
|-
|-
|                                               || Bootloader Version 1.0.0 || Bootloader Version 1.1.0 || Bootloader Version 1.2.0
|-
| LIM-U-LED-850 Version 1.1.0                   || ok                       || ok                       || ok
|-
| LIM-U-LED-850 Version 2.1.0                   || ok                       || ok                       || ok
|-
| IF-MTK-310 Version 1.1.0                      || ok                       || ok                       || ok
|-
| IF-MTK-310 Version 1.2.1                      || ok                       || ok                       || ok
|-
| TIM-UP-19k-S3-Spartan-6  Version 1.0.0        || ok                       || ok                       || ok
|-
| TIM-UP-19k-S3-Spartan-6  Version 2.0.0        || ok                       || ok                       || ok
|-
| eCM-BF561 Version 1.1.0        || ok                       || ok                       || ok
|}

;Firmware Support Matrix
:The following table shows the compatibility list between different hard- and firmware versions.
:{| class="wikitable"
|-
|-
|                                               || Firmware Version 1.0.0 || Firmware Version 1.1.0 || Firmware Version 1.2.0 || Firmware Version 2.0.0
|-
| LIM-U-LED-850 Version 1.1.0                   || ok                     || ok                     || ok                     || ok
|-
| LIM-U-LED-850 Version 2.1.0                   || ok                     || ok                     || ok                     || ok
|-
| IF-MTK-310 Version 1.1.0                      || ok                     || ok                     || ok                     || ok
|-
| IF-MTK-310 Version 1.2.1                      || ok                     || ok                     || ok                     || ok
|-
| TIM-UP-19k-S3-Spartan-6  Version 1.0.0        || ok                     || ok                     || ok                     || ok
|-
| TIM-UP-19k-S3-Spartan-6  Version 2.0.0        || ok                     || ok                     || ok                     || ok
|-
| eCM-BF561 Version 1.1.0        || ok                                    || ok                     || ok                     || ok
|}

;Bootloader/Firmware Support Matrix
:The following table shows the interoperability between different bootloader and firmware versions.
{| class="wikitable"
|-
|-
|                                               || Firmware Version 1.0.0  || Firmware Version 1.1.0 || Firmware Version 1.2.0 || Firmware Version 2.0.0
|-
| Bootloader Version 1.0.0                         || ok                   || ok                     || ok                     || ok
|-
| Bootloader Version 1.1.0                         || ok                   || ok                     || ok                     || ok
|-
| Bootloader Version 1.2.0                         || ok                   || ok                     || ok                     || ok
|}