Quelltext der Seite Flashing via Serial line using ATK from Freescale (i.MX31)

(tested with i.MX31 on DEV-i.MX31 Revision 2.1)

* Install and start Advanced Toolkit (Windows program!)
* select i.MX CPU: i.MX31 TO2
* Device Memory initial: DDR
* Select Serial Port (NOT USB)
* Change boot mode on Devboard
** 00001011 (1...8) ON = 1; OFF = 0 
* Select Flash Tool, click GO (!)
* Flash Model: NOR S71....
* Operation Type: Program
* Select Image
* Start Flashing (Takes a while) 
* Change Boot mode to normal:
** 01011011 (1...8) ON = 1; OFF = 0 
* If the boot mode is changed, board must be resetted afterwards.

[[Category:i.MX]]
[[Category:i.MX31]]