Argos 3D - P310 Software

Bootloader

Take care when you perform a bootloader update! Loosing power during the update process may damage the flash content, makeing the device unusable! Make a bootloader update only if the new version contains features which are absolutely necessary for your application!

V1.0.0

Initial release

V1.1.0

Update

Changes from previous version:

Type	Description
Bugfix	Bugfixes to prevent unexpected behaviour
Modification	Trigger in GPIO now correctly configured as input
Modification	Trigger out GPIO now correctly configured as output
Modification	LIMs are now disabled in Bootloader state (not supported by LIMs <V2.0.0)

V1.2.0

Update

Changes from previous version:

Type	Description
Bugfix	Bootloader did not delete user reg map on update
Feature	Added network configured bootloader mode support

The bootloader binary files can be found on our customer software package CD downloadable here: download section.

Firmware

The firmware binary files can be found on our customer software package CD downloadable here: download section.

V1.0.0

Initial release

V1.1.0

Update

Changes from previous version:

Type	Description
Feature	Added LIM control
Feature	Added temperature manager

V1.2.0

Update

Changes from previous version:

Type	Description
Feature	Improved temperature stability
Mod	Changed temperature compensation factor 'a' to 1E-5 resolution (TempCompGradient3Lim, TempCompGradient3Tim, TempCompGradient3Baseboard)

V2.0.0

Update

Changes from previous version:

Type	Description
Bugfix	Fixed mirrored 3D image
Feature	TIM firmware version is read into CPLD firmware version register
Bugfix	Vertical and Horizontal FoV calculation corrected
Mod	Removed wait time to reduce jitter in manual trigger mode
Mod	Temperature compensation now active for all configurable modulation frequencies
Bugfix	Temperature compensation will not stay deactivated after configuring an unsupported modulation frequency anymore
Feature	Added support for network configured bootloader start and update (requires Bootloader V1.2.0 or higher)
Feature	Added manual trigger burst mode

Support Matrices

Bootloader Hardware Support Matrix

The following table shows the compatibility list between different hardware and bootloader versions.

	Bootloader Version 1.0.0	Bootloader Version 1.1.0	Bootloader Version 1.2.0
LIM-U-LED-850 Version 1.1.0	ok	ok	ok
LIM-U-LED-850 Version 2.1.0	ok	ok	ok
IF-MTK-310 Version 1.1.0	ok	ok	ok
IF-MTK-310 Version 1.2.1	ok	ok	ok
TIM-UP-19k-S3-Spartan-6 Version 1.0.0	ok	ok	ok
TIM-UP-19k-S3-Spartan-6 Version 2.0.0	ok	ok	ok
eCM-BF561 Version 1.1.0	ok	ok	ok

Firmware Support Matrix

The following table shows the compatibility list between different hard- and firmware versions.

	Firmware Version 1.0.0	Firmware Version 1.1.0	Firmware Version 1.2.0	Firmware Version 2.0.0
LIM-U-LED-850 Version 1.1.0	ok	ok	ok	ok
LIM-U-LED-850 Version 2.1.0	ok	ok	ok	ok
IF-MTK-310 Version 1.1.0	ok	ok	ok	ok
IF-MTK-310 Version 1.2.1	ok	ok	ok	ok
TIM-UP-19k-S3-Spartan-6 Version 1.0.0	ok	ok	ok	ok
TIM-UP-19k-S3-Spartan-6 Version 2.0.0	ok	ok	ok	ok
eCM-BF561 Version 1.1.0	ok	ok	ok	ok

Bootloader/Firmware Support Matrix

The following table shows the interoperability between different bootloader and firmware versions.

	Firmware Version 1.0.0	Firmware Version 1.1.0	Firmware Version 1.2.0	Firmware Version 2.0.0
Bootloader Version 1.0.0	ok	ok	ok	ok
Bootloader Version 1.1.0	ok	ok	ok	ok
Bootloader Version 1.2.0	ok	ok	ok	ok