PEEDI Configuration (SBC-i.MX51)

Aus BECOM Systems Support
Version vom 22. August 2023, 20:35 Uhr von en>Peter (1 Version importiert)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen

i.MX51 is supported by the Peedi JTAG (Official website).

  • Here is the configuration file for SBC-i.MX51.
  • Test the RAM setup:
memory test
  • Our NAND flash is not yet supported by the PEEDI firmware.
Abgerufen von „https://becomwiki.live.md-websolutions.com/index.php?title=PEEDI_Configuration_(SBC-i.MX51)&oldid=129“