Argos 3D - P100
The upcoming Argos3D camera platform stands for state of the art processor technology combined with outstanding image processing software to build a intelligent embedded camera system integrated into a smart housing with high quality optics.
- Quick Start
- Quick Start Guide
- HowTo: Firmware update with LightVis
- Manuals
- User Manual
- Offset Calibration Guide
- Hardware
- The Argos3D - P100 Camera supports the use of an additional external light source (ToF-Flash). The External Illumination Guide describes how.
- Software
- Bluetechnix 'Time of Flight' API
- The Argos3D-P100 camera is supported by our ToF API.
- Applying lense correction
- The Argos3D - P100 Camera provides a calibration file for precise 3D position calculation. See the Lense Calibration Manual
- Windows 8 support
- For windows 8 support please download the latest support CD package from the software download section. The latest packages contains a signed version of the driver.
- If you use an older version of the driver please follow the steps below:
- Open a command line and enter the command
shutdown.exe /r /o /f /t 00
Attention: The computer restarts immediately, therefore save all data before executing this command. Alternatively, from Windows 8 control panel, choose General→Under “Advanced Startup”→Restart now. - After some time you will be prompted with a menu with following options.
- Continue
- Troubleshoot
- Turn off
- → Choose Troubleshoot
- Then the following menu appears:
- Refresh your PC
- Reset your PC
- Advanced Options
- → Choose Advanced Options
- The following menu appears:
- System Restore
- System Image Recovery
- Automatic Repair
- Command Prompt
- Windows Startup settings
- → Choose Windows Startup Settings, then Click "Restart".
- Now the computer will restart and the boot menu appears. Choose “Disable Driver signature Enforcement” from the menu. Now Windows will start and you can do the installation of the driver that is not signed.
- Open a command line and enter the command
- If you use an older version of the driver please follow the steps below:
- Firmware
- Available firmware binaries
- v1.0.0
- v2.3.1
Be aware that a direct update from version v1.0.0 to v.2.3.1 using the BltTofSuite is not possible. To update from v1.0.0 please use the firmware update package (20151030_Argos-P100_FirmwareUpdater_v1.2.zip) available from the software download page. An instruction on howto update is included in the zip file.
- Download
- For software downloads, please refer to software download.
If you encounter any problems feel free to contact us at support@bluetechnix.com