Lense Calibration Manual
Automatic calibration file load at Startup
The calibration data file is loaded automatically when the connection is established. Simply place the calibration file in the application folder:
- In order to obtain the lense calibration data for your Argos3D - P100, go to the download section and download the argos3d.cal file or get it from your support cd (directory lense_calibration).
- Move the file into the same folder where the PMDSDK library is located.
- Start the software of your own choice and connect to the camera.
- Perform the source command IsCalibrationDataLoaded and check if calibration data was loaded succesfully.