Lens Calibration Guide
Lens Calibration Guide
For an accurate point cloud or different lenses it may be necessary to provide an accurate lens correction file to the Argos3D-P310. You have to download this calibration file performing the following steps.
Downloading a lens calibration file
- Download and start the Sentis-ToF-M100-Downloader provided by Bluetechnix
- Make sure your camera is connected and accessible via TCP/IP
- Click on "Flash lens calibration file"
- Open the calibration file
- Follow the screen outputs and wait for the process to finish
- In any X/Y/Z image mode the 3D data adjusts to the new lens immediately