Lens Calibration Guide

Lens Calibration Guide

For an accurate point cloud or different lenses it may be necessary to provide an accurate lens correction file to the Argos3D-P310. You have to download this calibration file performing the following steps.

Downloading a lens calibration file

1. Download and start the Sentis-ToF-M100-Downloader provided by Bluetechnix
2. Make sure your camera is connected and accessible via TCP/IP
3. Click on "Flash lens calibration file"
4. Open the calibration file
5. Follow the screen outputs and wait for the process to finish
6. In any X/Y/Z image mode the 3D data adjusts to the new lens immediately